pellimits.com
CAS 8052-41-3VOC

Stoddard Solvent

OSHA PEL 500 ppm· Volatile Organic Compounds · NIOSH method NIOSH 1550

OSHA PEL (8-hr TWA)
500 ppm
Target organs
CNS; skin; eyes
Sampling method
NIOSH 1550

Stoddard Solvent (8052-41-3)

Stoddard Solvent is a volatile organic compound with CAS Registry Number 8052-41-3. Under the OSHA air contaminants standard (29 CFR 1910.1000), its Permissible Exposure Limit (PEL) — the legal 8-hour time-weighted average (TWA) for general industry — is 500 ppm. The principal target organs are the CNS; skin; eyes, and workplace air is sampled and analyzed by NIOSH 1550.

Exposure Limits at a Glance

Limit Value Basis
OSHA PEL (8-hr TWA) 500 ppm 29 CFR 1910.1000
NIOSH REL See note below NIOSH Pocket Guide
Hazard Class Volatile Organic Compound VOC
Target Organs CNS; skin; eyes NIOSH / OSHA
Sampling Method NIOSH 1550 NIOSH Manual of Analytical Methods

NIOSH REL note: TWA values in the ppm range; NIOSH RELs are frequently 10x stricter than the OSHA PEL. The REL is a non-regulatory recommendation; where a NIOSH REL exists it is typically more protective than the OSHA PEL.

How It Enters the Body & Health Effects

Exposure to Stoddard Solvent is assessed against the CNS; skin; eyes — the organ systems most consistently affected in occupational studies. Employers must ensure no employee’s 8-hour TWA exceeds the 500 ppm PEL, and must use engineering controls, work practices, and — where required — respiratory protection to keep exposures at or below that level.

Sampling & Compliance Notes

  1. Determine whether the exposure is a full-period 8-hour TWA or a short-term / ceiling scenario. Ceiling and STEL excursions apply to several VOC-class agents regardless of the 8-hour average.
  2. Calibrate personal sampling pumps before and after each shift and record flow rates; method NIOSH 1550 specifies media, flow, and analysis.
  3. Compare analytical results to the OSHA PEL of 500 ppm and the NIOSH REL. Document the higher of the two for internal exposure-control targets.
  4. Where the PEL includes a “skin” notation, dermal absorption can contribute to the dose — glove selection and hygiene facilities are part of compliance.

Frequently Asked Questions

What is the OSHA PEL for Stoddard Solvent?

The OSHA Permissible Exposure Limit (8-hour TWA) for Stoddard Solvent is 500 ppm.

What is the CAS number for Stoddard Solvent?

The CAS Registry Number for Stoddard Solvent is 8052-41-3.

What are the target organs for Stoddard Solvent?

The primary target organs are the CNS; skin; eyes.

How do you measure Stoddard Solvent in workplace air?

Use NIOSH analytical method NIOSH 1550 for air sampling and laboratory analysis.

What hazard class is Stoddard Solvent?

It is classified here as a Volatile Organic Compound (VOC).

Related VOC chemicals

Other volatile organic compounds with lower or comparable exposure limits.