Portland Cement Dust (65997-15-1)
Portland Cement Dust is a particulate / dust with CAS Registry Number 65997-15-1. Under the OSHA air contaminants standard (29 CFR 1910.1000), its Permissible Exposure Limit (PEL) — the legal 8-hour time-weighted average (TWA) for general industry — is 5 mg/m3. The principal target organs are the Respiratory tract; skin; eyes, and workplace air is sampled and analyzed by NIOSH 0500.
Exposure Limits at a Glance
| Limit | Value | Basis |
|---|---|---|
| OSHA PEL (8-hr TWA) | 5 mg/m3 | 29 CFR 1910.1000 |
| NIOSH REL | See note below | NIOSH Pocket Guide |
| Hazard Class | Particulate / Dust | Particulate |
| Target Organs | Respiratory tract; skin; eyes | NIOSH / OSHA |
| Sampling Method | NIOSH 0500 | NIOSH Manual of Analytical Methods |
NIOSH REL note: NIOSH RELs are often 10x lower than the PEL and include a respirable fraction. The REL is a non-regulatory recommendation; where a NIOSH REL exists it is typically more protective than the OSHA PEL.
How It Enters the Body & Health Effects
Exposure to Portland Cement Dust is assessed against the Respiratory tract; skin; eyes — the organ systems most consistently affected in occupational studies. Employers must ensure no employee’s 8-hour TWA exceeds the 5 mg/m3 PEL, and must use engineering controls, work practices, and — where required — respiratory protection to keep exposures at or below that level.
- Hazard class: Particulate / Dust. Particulate-class agents are managed with the hierarchy of controls (elimination, substitution, engineering controls, administrative controls, then PPE).
- Monitoring: collect personal air samples in the breathing zone and submit them under NIOSH 0500 for laboratory analysis.
- Medical surveillance: consult the OSHA substance-specific standards and the NIOSH Pocket Guide when the target organs are the Respiratory tract; skin; eyes.
Sampling & Compliance Notes
- Determine whether the exposure is a full-period 8-hour TWA or a short-term / ceiling scenario. Ceiling and STEL excursions apply to several Particulate-class agents regardless of the 8-hour average.
- Calibrate personal sampling pumps before and after each shift and record flow rates; method NIOSH 0500 specifies media, flow, and analysis.
- Compare analytical results to the OSHA PEL of 5 mg/m3 and the NIOSH REL. Document the higher of the two for internal exposure-control targets.
- Where the PEL includes a “skin” notation, dermal absorption can contribute to the dose — glove selection and hygiene facilities are part of compliance.
Frequently Asked Questions
What is the OSHA PEL for Portland Cement Dust?
The OSHA Permissible Exposure Limit (8-hour TWA) for Portland Cement Dust is 5 mg/m3.
What is the CAS number for Portland Cement Dust?
The CAS Registry Number for Portland Cement Dust is 65997-15-1.
What are the target organs for Portland Cement Dust?
The primary target organs are the Respiratory tract; skin; eyes.
How do you measure Portland Cement Dust in workplace air?
Use NIOSH analytical method NIOSH 0500 for air sampling and laboratory analysis.
What hazard class is Portland Cement Dust?
It is classified here as a Particulate / Dust (Particulate).